This article discusses using the display, hold, mute, redial, speaker, and transfer feature buttons on the 30-button (ITE30) telephone.
- Table of Contents:
Display
Display Abbreviated Dial Numbers
- Press DSPL (lamp on).
- Press ABVD.
- Repeat pressing ABVD until through list.
Display Auto Dial Numbers
- Press DSPL (lamp on).
- Press AUTO DIAL. The number to be auto dialed displays.
Display Redial Number
- Press DSPL (lamp on).
- Press REDL. The number to be redialed displays.
Display Forwarding Number
- Press DSPL (lamp on).
- Press CFWD. The forwarding number displays.
Display Callback Number
- Press DSPL (lamp on).
- Press CLBK.
- Repeat pressing CLBK until through list.
- Press Hold.
Hold
Place Call on Hold
- With the call on line, press Hold.
- Hang up. Another call may be placed.
Retrieve Held Call
- Press SPKR or lift handset.
- Press Hold. The call is retrieved.
Answer Call Waiting Using Hold and SPKR
- When you hear the call waiting tone, press Hold.
- Press SPKR. The incoming call is on the line.
- Press SPKR. The call ends and the phone rings.
- Press SPKR. The holding call is on line.
Answer Call Waiting Using Hold and Handset
- When you hear the call waiting tone, press Hold.
- Press [Line Button]. The incoming call is on line.
- Press [Line Button]. The call ends and the phone rings.
- Press [Line Button]. The holding call is on line.
Mute (MUTE)
Mute Handset or Speaker
- Press Mute (lamp on). You can hear the caller, they cannot hear you.
Remove Mute from Speaker or Handset
- Press Mute (lamp off). You can hear the caller, and the caller can hear you.
Redial (REDL)
Display Redial Number
- Press DSPL (lamp on).
- Press REDL. The number to be redialed displays.
Redial Last Off Campus Call
- Press SPKR or lift handset.
- Press REDIAL. The system dials the call.
Speaker (SPKR)
Answer or Dial calls
- Press SPKR (lamp on). The call is on the line.
Switch Handset to Speaker
- Press SPKR (lamp on).
- Replace handset.
Switch Speakerphone to Handset
- Lift handset (lamp off).
Transfer (XFER)
Transfer on Campus
- With the call on line, press XFER (lamp on).
- When you hear the dial tone, dial the 5 digit phone number.
- Hang up.
Transfer Off Campus
- With the call on line, press XFER (lamp on). You will hear the dial tone.
- University Customers:
- Dial [8] + area code + phone number
- Fairview Customers:
- Dial [9] + area code + phone number.
- Hang up.
Cancel a Transfer
- Busy or unanswered line:
- Press XFER. The original call is on the line.
3-Way Conference
- Begin with the 1st call on line and press XFER (lamp on).
- Dial the phone number. The party answers/announces conference.
- Press XFER (lamp on). All 3 parties are on line (lamp on).